1. Websites

    1. LEHVOSS International

      1. Lehmann&Voss&Co. de | en 
      2. LEHVOSS UK en 
      3. LEHVOSS France fr | en 
      4. LEHVOSS Italia it | en 
      5. LEHVOSS North America en 
      6. LEHVOSS Shanghai en | cn 
      7. LEHVOSS Nederland en 
      8. LEHVOSS Schweiz de 
      9. LEHVOSS Iberia es | en 
      10. Engredo, Denmark en 

info(at)lehvoss.cn

+86 21 6278 5199

LEHVOSS ShanghaiProductsCustomized Polymer Materials LUVOCOM®, LUVOSINT®

LUVOCOM® compounds for top technical achievements

Our LUVOCOM® business unit specializes in thermoplastic high-performance compounds, which allow precisely tuned material properties for a wide range of technical applications. With more than 30 years of experience in tailor-made compounds, LUVOCOM® is your partner with advice and support in applications technology, from engineering design through to production.

Many applications require materials with high tensile strengths. At the same time, these materials have to be light – particularly in the case of components subject to a dynamic load. Often low thermal expansion, dimensional accuracy and long-term dimensional stability are required for replacing metals. In many cases, carbon-fibre reinforced LUVOCOM®-compounds meet these demands – and they are also electrically conductive. They give the design engineer a chance to deploy lighter and generally more economical injection moulded plastic parts.

Learn more about the carbon-fibre reinforced compounds from Lehmann&Voss&Co. here.

For especially high temperatures of up to 260 °C we supply high-performance compounds based on various polymers. Depending on the polymer used in each case, even high temperatures do not present any problems. Typical applications include mechanical engineering, medical technology and parts subject to high stresses for the engine compartment and drive train in the automotive sector.

Learn more about the high-temperature resistant compounds from Lehmann&Voss&Co. here.

Tribologically adjusted LUVOCOM® materials have deposits of lubricant, thus eliminating the need for the expensive and time-consuming work of additional surface lubrication. Lubricant-modified components and assemblies remain clean while long-term performance and reliability are significantly improved.

Learn more about the lubricant-modified compounds from Lehmann&Voss&Co. here.

Conductive LUVOCOM®-materials have decisive advantages over metals or coatings: they offer a great degree of freedom in design; the finished parts have a lower weight, are easier and more cost-effective to manufacture and are also tougher.

Learn more about the electrically conductive compounds from Lehmann&Voss&Co. here.

Plastics are poor heat conductors. The thermal conductivity in standard materials lies between 0.1 and 0.4 W/mK. By using special additives – generally mineral-based – LUVOCOM®-materials from this product group achieve significantly higher values of up to more than 40 W/mK. Through our special expertise in compounding, we provide you with precisely the material you need to meet your requirements. Electrically conductive and electrically insulating products are also available.

Learn more about the thermally conductive compounds from Lehmann&Voss&Co. here.

Detectable LUVOCOM® high-performance compounds offer a broad range of tailor-made solutions for these special requirements. All the versions supplied are easy to process and are characterized by the attractive surface of the finished components. Segregation of the additives is ruled out. Pigmentations are possible in numerous colour shades.

Learn more about the detectable compounds from Lehmann&Voss&Co. here.

Under the LUVOCOM® P brand, we supply you with thermoplastic materials in powder form. Here, too, speciality products are involved; modified thermoplastics with particle sizes below 100 micrometres. The fine powders are used in various applications. Examples include electrostatic powder coating of metals and laser sintering for the generative production of plastic parts.

Learn more about LUVOCOM® P and LUVOSINT® from Lehmann&Voss&Co.

We produce your compound

Would you like to have a certain material manufactured under contract? We offer you this service at our production sites in Germany, USA and China. Apart from the pure production, we also provide support in material development and raw material selection. Manufacturing is carried out in a cost-effective manner, based on agreed specifications and using our specialised manufacturing plants and laboratory facilities. 

LUVOCOM® LFT | Long Fiber Thermoplastics

 

LUVOCOM® LFT is a high-performing product line of structural materials. LFT stands for long fiber reinforced thermoplastics and are the logical complement to short fiber materials. They expand the range of applications for plastic-based structural materials. With this, the LEHVOSS Group rounds off the product portfolio and presents itself as a full-range supplier in the demanding thermoplastic environment.

LFTs performance spectrum begins where other materials - such as short-fiber-reinforced thermoplastics or metals like steel, aluminum or magnesium alloys - simply reach their performance limits. This is where LFT strength clearly come into play in a wide variety of components:

  • High strength and stiffness
  • Low creep tendency
  • Better surface quality
  • Lower shrinkage and thus less warpage and higher dimensional stability
  • Extremely high impact strength/energy absorption (especially also in the low-temperature range)

You are also welcome to ask us about special solutions, e.g. colored materials, other cutting lengths and special polymers.

 

Learn more about high-performance-compounds from Lehmann&Voss&Co.: www.luvocom.com

LUVOCOM®-Video

info(at)lehvoss.cn

+86 21 6278 5199

Your personal contact

Harry Wang
Sales Director CPM China
Phone: +86-186 1653 9003
harry.wang(at)lehvoss.cn